Blink Module Secara Freertos Di Esp32
Blink Module Secara Freertos Di Esp32
Requirement
- VSCode
- Python 3.12
- PlatformIO
- ESP32
Persiapan
- Dapatkan source dari alamat GitHub CuteESP32
- Masuk buka dengan VSCode dan pastikan root ada di CuteESP32
- Aktifkan virtual environtment
- Install platformio Panduan persiapan bisa dilihat di lihat di sini
- Buka console (terminal) di VSCode
- Koneksikan ESP32 ke USB PC/Laptop
- Jalankan perintah pio run -t upload -d .\BlinkExample\
- Tunggu samapi proses selesai
CuteEsp32> pio run -d .\BlinkExample\
Processing cute_esp (platform: espressif32; board: esp-wrover-kit; framework: arduino)
-------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp-wrover-kit.html
PLATFORM: Espressif 32 (6.12.0) > Espressif ESP-WROVER-KIT
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (ftdi) On-board (ftdi) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:
- framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b
- tool-esptoolpy @ 2.40900.250804 (4.9.0)
- toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 43 compatible libraries
Scanning dependencies...
Dependency Graph
|-- BlinkModule
Building in release mode
Retrieving maximum program size .pio\build\cute_esp\firmware.elf
Checking size .pio\build\cute_esp\firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [= ] 6.6% (used 21472 bytes from 327680 bytes)
Flash: [== ] 20.5% (used 269129 bytes from 1310720 bytes)
=================== [SUCCESS] Took 2.95 seconds ===================
Check it out!
Tags:
Ikuti terus tutorial saya di e-Project dan channel
saya di
